DF 16 Rebar Tier
The rebar tier DF 16 offers labor relief well worth having. The mechanical device uses a proven twin wire mechanism which ties up to 1,000 uniform and firmly tied knots per hour. The times when reinforcing steel was tied bending down with pliers are over, because the DF 16 is easily operated with just one hand and in an upright position. A professional tool for traditional rebar jobs as well as for fastening plastic ducts for the activation of construction components.
L x W x H with handle retracted 25.8 x 6.5 x 4.7 in L x W x H with handle extended 34.8 x 6.5 x 4.7 in Weight 4.9 lb Quantity Ties per tie strip 77 Tie wire material Copper-plated wire Diameter of the tie wire 0.04 in Tying speed approx. 1,000 knots/h Time required per knot 0.8 sec Diameter of the round materials to be fastened (min.) 0.24 + 0.24 in Diameter of the round materials to be fastened (max.) 0.63 + 0.63 in Order quantities of the ties Box = 7,700 pieces, pallet = 138,600 pieces
Wacker Neuson EZY-Vibe Portable Concrete Vibrator – Honda
Overall Size (lxwxh) mm – 2240x254x267
Vibrator Head Diameter mm – 45
Dry Weight – 11.5KG
Engine Type: Air-cooled, 4-stroke petrol, single cylinder, Honda GX 35
Operating Power: 1.2kW (1.6hp)
Operating Speed: 7500rpm
Operating Speed – up to 9500
Max Rated Power: 1.2kW (1.6hp) @ 7000rpm
Power Rating Specification – SAE J1995
Piston Discplacement: 35.8cm3
Fuel Type: Petrol Unleaded 91 Octane
Fuel Tank Capacity: 0.65L
Fuel Consumption: 0.6L/h
The basis for first-class concrete is choosing the right equipment. Wacker Neuson’s Ezy Vibe concrete vibrator features superior compaction performance and consistency and offers new levels of ease and solutions to applications that may otherwise be difficult and time consuming.
This Australian-made pole vibrator offers patented technology which delivers exceptional performance. Portable vibrators are ideally suited for light to medium duty concrete work and hard-to-reach concrete applications. These vibrators are portable and productive – a winning combination for any job site.
P 35A Wet Screed
When finishing concrete floors Wacker Neuson’s wet screed carries out three working processes in one: spreading, screeding and compacting. Not only is this extremely practical, the device is also very easy to use. The carrying handles make it easy to move the P 35A over the concrete and delivers first-class results in the process. It is suitable for all kinds of concrete, because the centrifugal force is adjustable to 7 positions.
Wet screed P 35A
Weight 34.2 lb Engine / Motor Air-cooled single-cylinder four-cycle gasoline engine Engine / Motor manufacturer Honda Displacement 2.2 in³ Engine performance 1.0 (1.3) kW (hp) at rpm 7,000 rpm Tank capacity 0.69 US qt Fuel consumption 0.16 US gal/h Length 44 in Width 35 in
1.200–2.400 mm profile lengths
SBW 4F SBW 15M SBW 6F SBW 20M SBW 8F Weight lb 8.4 10.1 11.9 13.4 16.8 Length in 47.2 59.1 70.9 78.7 94.4 Width in 6.5 6.5 6.5 6.5 6.5
3.000 – 4.900 mm profile lengths
SBW 10F SBW 12F SBW 14F SBW 16F Weight lb 20.9 25.1 29.3 33.5 Length in 118.1 145.7 169.3 192.9 Width in 6.5 6.5 6.5 6.5
HD3.7 Honda Drive Unit
Wacker Neuson HD3.7 Drive Unit.
Powered by Honda GX160 4.1kW Petrol Engine.
3 Year Factory Honda Engine Warranty Applies.
Operating Weight: 29kg.
Shipping Weight: 30kg.
Fuel Tank: 3.6L.
Machine Size: 460mm L x 460mm W x 530mm H.
Shipping Size: 480mm L x 480mm W x 550mm H.
MD3.5 Drive Unit
The MD3.5 drive unit from Wacker Neuson is a perfectly designed, simple to use, multipurpose drive unit which the competition have been attempting to copy for decades. These drive units have been manufactured by Wacker Neuson for over 40 years. They are designed to run both pumps and a range of vibrators, making them the prefect addition to any construction site.
Wacker Neuson has been making construction equipment for over 160 year with proven engineering experience.
Powered by a Genuine Wacker Neuson engine.
Universal design allows for use with products from other manufacturers.
Drives vibrators from 25mm to 60mm.
Drives submersible pumps.
3. Ease of Use
Dished steel base for ease of transport over concrete reinforcing mesh.
Universal 3 dog coupling works with all reputable manufacturers.
Light weight construction.
Ergonomically designed roll cage for lifting.
Long life dual stage air filters fitted for low maintenance.
Cast iron bell housing for long service life.
Robust fabricated roll bar.
Coupling bolted to shaft, no chance of slipping or movement as found on inferior products.
25, 28, 38, 40, 57 and 60mm vibrators.
Operating weight 30 kg
Size (W x L x H) 460 x 460 x 530mm
Coupling 3 Dog Universal
Manufacturer Wacker Neuson
Construction Air-cooled, single-cylinder petrol
Displacement 163 cm3
Engine speed 2,800 rpm
Engine output according to ISO 4.1 kW (5.5HP)
Fuel consumption 0.92 L/h
Tank capacity 3.6 L
M Series Flex-Shaft Internal Vibrators
The HMS range offers flexibility and cost-effectiveness: The internal vibrators of this range are individually configurable with different flexible shafts, vibrator heads and motors. All devices feature quick disconnect coupling for quick and easy use. The vibrator heads are induction hardened and therefore offer high wear resistance.
M 1000 M 2000 M 3000 Engine / Motor double insulated universal motor double insulated universal motor double insulated universal motor Voltage 1~ V 230 230 230 Current A 4.5 6.5 10 Frequency Hz 50 – 60 50 – 60 50 – 60 Power kW (hp) 1.0 (1.36) 1.5 (2.0) 2.3 (3.1) Weight lb 12.6 14.1 18.5 L x W x H in 13.8 x 6.3 x 7.9 13.8 x 6.3 x 7.9 13.8 x 6.3 x 7.9 Power cable ft 15.4 15.4 15.4
Gasoline engine drives
Engine / Motor air-cooled single-cylinder four-stroke Honda gasoline engine Power 1.0 (1.36) kW (hp) Fuel type regular-grade gasoline Fuel consumption 0.21 US gal/h Tank capacity 0.58 US qt Weight 23.4 lb L x W x H 16.7 x 10.8 x 15.9 in
SM1-E SM2-E SM4-E Weight lb 3.3 5.5 9.5 Length in 39.3 78.7 157.5
SM0-S SM1-S SM2-S SM3-S Weight lb 2.9 6 9.5 13 Length in 19.7 39.4 78.4 118.1
SM4-S SM5-S SM7-S SM9-S Weight lb 15.7 20.6 28.4 33.3 Length in 157.5 196.8 275.6 354.3
Vibrator heads – standard
H 25 H 35 H 45 H 55 H 65 Diameter in 1 1.4 1.8 2.2 2.6 Weight lb 2.9 4.6 7.4 11.9 15 Length in 17.3 16.1 15.2 16.1 15.2
AR, PAR, FU and FUE Series (Normal & High Frequency External Vibrators)
Wacker Neuson has a vast and complex range of Normal and High Frequency external vibrators, FU and FUE series frequency and voltage inverters. The highly specialised nature of these products, and the substantial volume of data require a competent sales rep to explain their functions.
Please contact CDTA for more detailed information on these product ranges.
FREECALL. 1300 726 511
Wacker Neuson MCT 36 Walk Behind Trowel
The M-series MCT36 Walk-behind Trowel is ideal for smaller jobs.
This trowel is optimally balanced and can be effortlessly controlled in a wide range of speeds.
The MCT36 Walk-behind Trowel will make your process more efficient and improve the concrete surface finish.
Equipped with height adjustable “whale tail” trowel handle for ergonomic operation.
Powered with reliable and powerful four-stroke Petrol engine.
Variable speeds: lower speeds for floating, higher speeds for finishing.
Throttle control located on the handle for adjusting blade speed.
Integrated lift point for job site maneuvering.
Troweling diameter: 915mm
Pitch range: 0-15 °
Rotor Speed (min/max.): 70/137rpm
Quantity of blades: 4
Engine / Motor: Air-cooled, single-cylinder four-cycle Petrol engine
Engine / Motor manufacturer: Loncin
Engine / Motor type: G200F
Displacement: 196 cm³
Engine performance @ 3,600 rpm: 4.1 (5.5) kW (hp)
RPM: 3,600 rpm
Fuel consumption: 1.2 l/h
Fuel tank capacity: 3.6 l
Tank capacity (engine oil): 0.6 l
Length: 1820 mm
Width: 945 mm
Height: 980 mm
Weight: 83 kg
CT36 Standard & Variable Speed Walk-behind Trowel Range
The models of the CT 36 trowel range feature a trowel diameter of 915 millimeters – ideal for finishing medium areas. The trowels are optimally balanced, therefore they can be effortlessly controlled in the wide range of speeds. The transmission brake, electronic safety switch and engine speed sensor offer additional triple protection for the user. In an emergency situation the device will simply switch off and the handle will come to a stand-still after no more than a three-quarter turn. Furthermore, the unit will only start if the throttle lever is set to zero. This prevents an inadvertent rotation of the handle on start-up.
CT 36-5A CT 36-8A CT 36-8A-V L x W x H (with handle, fixed version) in 79 x 36 x 41 79 x 36 x 41 79 x 36 x 41 Weight (without handle) lb 161 185.2 198.4 Troweling diameter in 36 36 36 Pitch range ° 0 – 30 0 – 30 0 – 30 RPM – area rpm 60 – 125 60 – 125 20 – 200 Quantity of blades 4 4 4 Engine / Motor Air-cooled single-cylinder four-cycle gasoline engine Air-cooled single-cylinder four-cycle gasoline engine Air-cooled single-cylinder four-cycle gasoline engine Engine / Motor manufacturer Honda Honda Honda Engine / Motor type GX 160 GX 240 GX 240 Displacement in³ 10 15 15 Engine performance (DIN ISO 3046) kW (hp) 4.3 (5.7) 6.2 (8.3) 6.2 (8.3) at rpm rpm 3,800 3,800 3,800 Operating performance (DIN ISO 3046) kW (hp) 4.3 (5.7) 6.2 (8.3) 6.2 (8.3) at rpm rpm 3,800 3,800 3,800 Fuel consumption US gal/h 0.48 0.71 0.71 Tank capacity US qt 3.8 6.3 6.3
CT48 Standard & Variable Speed Walk-behind Trowel Range
With a trowel diameter of 1.220 millimeters the models of the CT 48 trowel range are ideal for finishing medium large areas. The trowels are optimally balanced, therefore they can be effortlessly controlled in the wide range of speeds. The transmission brake, electronic safety switch and engine speed sensor offer additional triple protection for the user. In an emergency situation the device will simply switch off and the handle will come to a stand-still after no more than a three-quarter turn. Furthermore, the unit will only start if the throttle lever is set to zero. This prevents an inadvertent rotation of the handle on start-up.
CT 48-8A CT 48-13A-V L x W x H in 85 x 48 x 41 85 x 48 x 41 Weight without handle lb 211.6 233.7 Troweling diameter in 48 48 Pitch range ° 0 – 30 0 – 30 RPM rpm 60 – 125 20 – 200 Quantity of blades 4 4 Engine / Motor Air-cooled single-cylinder four-cycle gasoline engine Air-cooled single-cylinder four-cycle gasoline engine Engine / Motor manufacturer Honda Honda Engine / Motor type GX 240 GX 390 Displacement in³ 15 20.6 Engine performance max. (DIN ISO 3046) kW (hp) 6.2 (8.3) 10 (13.4) at rpm rpm 3,800 3,800 Operating performance (DIN ISO 3046) kW (hp) 6.2 (8.3) 10 (13.4) at rpm rpm 3,800 3,800 Fuel consumption US gal/h 0.7 0.7 Tank capacity US qt 6.4 6.3
CRT 36 Ride-on Trowel
The CRT 36, 36-inch, ride-on trowel line offers quality results, high productivity and operator comfort. One person can easily and simply raise and lower the integrated wheel set from one jack at the rear of machine allowing easy maneuverability around the job site. During troweling, the wheel kit does not block the operator’s line of sight.
L x W x H Shipping 80 x 41 x 54 in L x W x H Operating 86 x 45 x 63.5 in
Operating weight 865 lb Troweling diameter 36 in Quantity of blades 8 Blades 14 x 6 in Combination blades 14 x 8 in Combination blades 14 x 10 in Pitch range 0 – 25 ° RPM area 25 – 165 rpm Engine / Motor 4-cycle, V-twin, 2-cylinder, gasoline engine Engine / Motor manufacturer Honda Displacement 42 in³ Operating performance 16.6 (22.2) kW (hp) RPM / speed Operating 3,600 rpm Fuel type Unleaded Gasoline Fuel consumption 2.4 US gal/h Tank capacity Fuel 26 US qt
CRT48 Ride-on Trowel
The models of Wacker Neuson’s CRT 48 trowel range feature a finishing diameter of 1220 mm. They deliver best results with maximum productivity. Their distinguishing feature is a superior steering system, which makes steering easier and thus prevents early user-fatigue. In addition, the rigid frame ensures excellent steering control. Combined with the ergonomic 2-lever controls it achieves optimum maneuverability.
L x W x H 101 x 51 x 58 in
Operating weight 1,329.4 lb Troweling diameter 48 in Quantity of blades 10 Blades 18 x 6 in Combination blades 18 x 6 in Combination blades 18 x 10 in Pitch range 0 – 25 ° RPM 25 – 165 rpm Engine / Motor Liquid-cooled four-cylinder four-cycle diesel engine Engine / Motor manufacturer Kohler Displacement 83.6 in³ Operating performance 26.0 (35.0) kW (hp) RPM / speed 3,800 rpm Fuel consumption 6.5 US gal/h Tank capacity 6.6 US qt
CRT60 Ride-on Trowel
The innovative technology of the ride-on trowel CRT 60 features an intelligent combination of a hydraulic drive with an electro-hydraulic steering system. The hydraulic drive regulates the engine speed in a way that resembles an automatic transmission of a car. A computer controller constantly monitors the engine speed and adjusts the hydraulic load at the same time. The electro-hydraulic steering concept with two joysticks enables accurate maneuvering and virtually fatigue-free working. Another hydraulic highlight: The built-in hydraulic wheel kit makes it possible to change float pans or blades easily without the need of a crane or fork lift.
L x W x H Shipping 130.5 x 67.5 x 65 in L x W x H Operating 127 x 65 x 57 in
Shipping weight 2,985 lb Operating weight 2,480 lb Troweling diameter 59 in Quantity of blades 12 Blades (Combination) 23 x 8 in Blades (Finsh) 23 x 6 in Blades (Float Pan Ø) 60 in Pitch range 0 – 25 ° RPM -area 25 – 150 rpm Engine / Motor Liquid-cooled four-cylinder four-cycle diesel engine Engine / Motor manufacturer Kubota Displacement 159.6 in³ Operating performance (SAE J1995) 66 hp RPM / speed 2,700 rpm Fuel type Diesel Fuel consumption 2.4 US gal/h Tank capacity Fuel 12 US gal Runtime 5 h