Weka DK16 Core Drill Motor
This versatile Drill Motor combines excellent performance with many of the features which contribute to safety and efficiency on site.
The Intellitronic electronic start-up system uses a microprocessor to ensure a smooth build-up of drilling speed and also guards against overload in use by causing the motor to pulsate until there is a return to safe operating conditions. As with other models, particular attention is paid to optimal lubrication of the 3 speed gearbox and double insulation of the electrical wiring to ensure safety and durability of use.
Drilling Ø (mm) 20-160 Nominal Power (W) 2000 Output Power (W) 1340 No-load Speed (1/min) 756/1680/3528 Load Speed (1/min) 540/1200/2520 Weight (kg) 5.9 Length (mm) 350 Voltage (V) 110 Tool Fixture 1¼“ UNC/m × ½“ BSP/f Mounting Neck (mm) 60 Decibel Level (dB(A)) 86 Vibration Level (m/s2) <2.5
Core CX 20-C3P Core Drill Motor
Compact and short design which is ideal for use in tight areas.
The soft grip increases the operator’s comfort.
The pistol grip with integrated LED load indication and double spirit level allows right and left handed use.
An optional pilot drill can be mounted for extra safety when drilling free hand.
Max. drill Ø
1/2” G + 5/4” UNC
150 mm – 200 mm
230 V – 2000 W
450 / 1050 / 2000 rpm
Xpert M-3300 Core Drill Motor
Xpert M-3300 rig mounted core drill motor is a professional quality drill motor, which is only suitable for rig mounted drilling | Water hose with flow indicator | LED overload indication | Integrated spacer block | SmarT-Tronic | Option: Wet vacuum cleaner | Extensions
3300W – 3 speed – Wet
- Max. ø Concrete ; 350mm
- Weight: 12,5kg
- Speed (rpm): 230/510/730
- Spindle: 1 1/4″
- 10 mA PRCD Switch
Weka DK32 Core Drill Motor
This machine combines many of the well respected features of the DK 22 drill motor with increased power (up to 3000 W) and enhanced performance. It is economic in use and designed for optimal efficiency and durability.
In addition to 3 speed gearing and oil-bath lubrication for the gearbox, both clutch and motor are protected from current overload and a start current limiter in incorporated for extra reliability. For drilling efficiency, the stainless steel spindle is DC-coated to protect against rust and abrasion, while the spindle has a quick-release ring mechanism for easy removal of the Core Drill.
Drilling Ø (mm) 55-350 Nominal Power (W) 3000 Output Power (W) 2100 No-load Speed (1/min) 380/767/1200 Load Speed (1/min) 230/480/720 Weight (kg) 11.9 Length (mm) 488 Voltage (V) 110 Tool Fixture 1¼“ UNC/m Foot fastening Standard 4×M8 with groove 10 × 4,3 Decibel Level (dB(A)) 86 Vibration Level (m/s2) <2.5
Cardi Talpa T9-475 E Core Drill Motor
The Cardi T9-475 E is a top of the range single phase core drill motor that will handle any job large or small with ease. Some of its features include:
– 4 gears with clutch all gears
– Earth leakage circuit breaker in the cable
– Drill Connection 5/4 “UNC (mâle)
– Handle for easy transport
– Engine in aluminum
Max. drill Ø
230 V – 3420 W
330 / 560 / 920 / 1530 rpm
Weka SR38 Core Drill Motor
Weka has always been very progressive in terms of introducing innovations in the area of diamond-tipped drilling machines. Weka’s latest development, SR technology (SR stands for Switched Reluctance), has already been introduced effectively in the company’s range of pillar drilling machines. The SR motors get the maximum potential out of the 220 volt mains network and no longer use carbon brushes. The SR38 has three mechanically regulated speeds, each of which operates in combination with 6 electronic speeds. These can be changed during drilling using push-buttons.
Oil lubrication gear wheels lubricated via oil bath and oil pump Water-cooling the machine is water-cooled, thereby eliminating the air inlet. The machine is also splash-proof to IP55 Safety – built-in slipper clutch and electronic soft-start control Drilling range – six optimally chosen rotational speeds Noise level – the special oil lubrication system, solid aluminium housing and absence of air infeeds reduce noise to an unusually low level
Drill bit engagement
3700 W230 V16 A
Ø70 – Ø370 mm